Oils and greases
Transmission oil Baroil® T90
Product details
T 90 EP 2S oil is obtained from refined mineral base oils, with the addition of additives that provide protection against wear, corrosion, rust, high pressure resistance, antifoaming properties, and appropriate behavior at both low and high temperatures (Corresponds to API: GL-4 additive level). The quality conditions for T 90 EP 2S oil, extracted from SR 8960-96, are as follows:
Observations
Packaging, marking, storage, transport, and handling are done according to STAS 4225 and internal instructions/procedures.
Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum.
The warranty period is 5 years from the date of manufacture.
Application Areas
The oil is used for lubricating vehicle gear transmissions (gearboxes, steering boxes) and other mechanical transmission systems, according to the provisions in the technical manuals of the respective vehicles/systems.
Technical details
| No. | Characteristics | Admissibility conditions | Test method |
| 1 | Density at 15°C, g/cm³ | max. 0,915 | SR EN ISO 12185 ASTM D 4052 |
| 2 |
Kinematic viscosity, mm²/s (cSt)
|
16,5 ... 18,0 min. 160 | SR EN ISO 3104 ASTM D 445 |
| 3 | Viscosity index | min. 85* | STAS 55 ASTM D 2270 |
| 4 | Pour point, °C | max. -20 | STAS 39 |
| 5 | Flash point M, °C | min. 220 | STAS 5489 |
| 6 | Water content, % | Missing |
SR 13484; STAS 24/2 ASTM D 95 |
| 7 | Substances insoluble in organic solvents, % | max. 0,015 | STAS 33, met.1 |
| 8 |
Foaming properties (tendency - stability), cm³, max.
|
30 - 0 30 - 0 30 - 0 |
SR ISO 6247+C1 ASTM D 892 |
| 9 | Corrosion on copper strip (3 h at 120°C) | max. 2c | SR EN ISO 2160 ASTM D 130 |
| 10 | Corrosion on steel in the presence of water | No traces of rust | SR ISO 7120 ASTM D 665 |
| 11 |
High-pressure resistance on the four-ball machine:
|
min. 1300 max. 0,5 |
STAS 8618 ASTM D 2783 |
*value achieved without the addition of viscosity index improver.
