Oils and greases
Hydraulic oil Baroil® H46
Product details
They are obtained from refined paraffinic base oils, with the addition of antifoaming agents. The technical quality conditions for H 46 oils, in accordance with ST-60/2012, are as follows:
Observations
The evaluation of the fidelity of test methods in this technical data sheet must meet the requirements of the SR EN ISO 4259:2007 standard “Petroleum products – Determination and application of precision values relating to test methods.” Samples will be taken according to SR EN ISO 3170:2004/C91:2005 “Liquid petroleum products. Manual sampling.” Packaging, marking, storage, transport, and handling are done according to current regulations (decisions, regulations, etc. specified in the product safety data sheet) and internal instructions/procedures.
Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum.
The warranty period, in storage, is 5 years from the date of manufacture.
Application Areas
They are used as fluids for hydrostatic and industrial hydraulic transmissions for light demands: pressures of max. 500 N/cm² (50 Kgf/cm²), at temperatures of max. 50°C and min. 2°C above the pour point.
Technical details
No. | Characteristics | Admissibility conditions | Testing method |
ISO viscosity grade | 46 | SR ISO 3448 | |
1 | Relative density at 15°C, max. | 0,895 |
SR EN ISO 3675/C91 ASTM D 1298 ASTM D 7042 |
2 | Flash point, COC, °C, min. | 205 | SR EN ISO 2592 ASTM D 92 |
3 | Kinematic viscosity at 40°C, cSt | 41,4-50,6 |
SR EN ISO3104/AC ASTM D 445 |
4 | Viscosity index, min. | 95 |
SR ISO 2909 ASTM D 2270 ASTM D 7042 |
5 | ASTM color, max. | 5 |
SR ISO 2049 ASTM D 6045 ASTM D 1500 |
6 | Corrosive action on copper strip, max. | 1b | SR EN ISO 2160 ASTM D 130 |
7 |
Foaming properties: Tendency to foam – foam stability Foam volume after 5 minutes of blowing air, cm³, max.
|
75-0 75-0 75-0 |
SR ISO 6247+C1 ASTM D 892 |
8 | Mineral acidity and alkalinity | Missing | SR 13549 |
9 | Neutralization index, mgKOH/g, max. | 0,05 | ASTM D 974 |
10 | Water, % | Missing | SR 13484 ASTM D 95 |
11 | Ash, % gr, max. | 0,01 | SR EN ISO 6245 ASTM D 482 |
12 | Substances insoluble in organic solvents, %, max. | 0,01 | STAS 33 |
13 | Pour point, °C, max. | -16 | SR 13552 ASTM D 97 |
14 | Aniline point, °C, min. | 95 | ASTM D 611 ( method A ) |