Oils and greases

Engine oil Baroil® M50

Product details

The oil is obtained from refined mineral oils, with added additives that give it the Super 2 level of additization (API: CC/SE, according to SR 13464 : 2001). The quality conditions for MD 50 SUPER 2 oil, extracted from ST-7/2007, Ed.1 are as follows:

Technical data sheet
Unsoare Baroil® UM170LiCa2

Observations

Packaging, marking, storage, transport, and handling are done according to STAS 4225 and internal instructions/procedures. Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum. The warranty period is 5 years from the date of manufacture.

Application Areas

It is used for lubricating engines with compression ignition and spark ignition, according to the indications in the technical manual, standards, or their operating instructions.

Technical details

No. Characteristics  Admissibility conditions Testing method
1 Density at 20°C, g/cm3 max. 0,915

SR EN ISO 12185

ASTM D 4052
2 Kinematic viscosity at 100°C, mm2/s 16,3 - 21,9

SR EN ISO 3104

ASTM D 445
3 Viscosity index min. 90

STAS 55

ASTM D 2270
4 Pour point, °C max. - 20

STAS 6170

ASTM D 97
5 Flash point COC, °C min. 240

SR EN ISO 2592

ASTM D 92
6 Sulfated ash, % max. 1,1

SR ISO 3987;

ASTM D 874
7 Total basicity number (TBN), mg KOH /g min. 6,0

SR ISO 3771

ASTM D 2896
8 Calcium, % m/m Reported

STAS 8428

ASTM D 4927
9 Zinc, % m/m Reported

STAS 7717

ASTM D 4927
10 Phosphorus, % m/m max. 0,11

STAS 7330

ASTM D 4927
11 Noack evaporation losses, % max. 5

STAS 8465

ASTM D 5800
12

Foaming properties (tendency - stability), ml, max.

  • at 24°C
  • at 93,5°C
  • at 24°C, after determining at 93,5°C

10 - 0

50 - 0

10 - 0

SR ISO 6247+C1

ASTM D 892
13 Copper strip corrosion (3 h at 100°C) max. 1b

SR EN ISO 2160

ASTM D 130

Customers were also interested in