Oils and greases

Engine oil Baroil® M30

Product details

The oil is obtained from refined mineral oils, with added additives that give it the Super 2 level of additization (API: CC/SE, according to SR 13464 : 2001). The quality conditions for MD 30 SUPER 2 oil, extracted from ST-7/2007, Ed.1 are as follows:

Observations

Packaging, marking, storage, transport, and handling are done according to STAS 4225 and internal instructions/procedures. Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum. The warranty period is 5 years from the date of manufacture.

Application Areas

It is used for lubricating four-stroke internal combustion engines, with compression ignition and spark ignition, of road, rail, or river transport means, according to the indications in the technical manual, standards, or their operating instructions.

Technical details

No. Characteristics  Admissibility conditions Testing method
1 Density at 20°C, g/cm3 max. 0,900 SR EN ISO 12185
ASTM D 4052
2 Kinematic viscosity at 100°C, mm2/s 9,4 - 12,5 SR EN ISO 3104
ASTM D 445
3 Viscosity index min. 90 STAS 55 
ASTM D 2270
4 Pour point, °C max. - 20 STAS 6170 
ASTM D 97
5 Flash point COC, °C min. 220 SR EN ISO 2592
ASTM D 92
6 Sulfated ash, % max. 1,1 SR ISO 3987 
ASTM D 874
7 Total basicity number (TBN), mg KOH /g min. 6,0 SR ISO 3771 
ASTM D 2896
8 Calcium, % m/m min. 0,15 STAS 8428 
ASTM D 4927
9 Zinc, % m/m min. 0,05 STAS 7717 
ASTM D 4927
10 Phosphorus, % m/m min. 0,04 STAS 7330
ASTM D 4927
11 Noack evaporation losses, % max. 8 STAS 8465 
ASTM D 5800
12

Foaming properties (tendency - stability), ml, max.

  • at 24°C
  • at 93,5°C
  • at 24°C, after determining at 93,5°C
10 - 0
50 - 0
10 - 0
SR ISO 6247+C1 br> ASTM D 892
13 Copper strip corrosion (3 h at 100°C) max. 1b SR EN ISO 2160 
ASTM D 130