Oils and greases

Engine oil Baroil® 15W40

Product details

The oil is obtained from refined mineral oils, with added additives that give it the Super 2 level of additization (API: SE/CC, according to SR 13464 : 2001). The quality conditions for MD 15W/40 SUPER 2 oil, extracted from ST-5/2007, Ed.1 are as follows:

Observations

Packaging, marking, storage, transport, and handling are done according to STAS 4225 and internal instructions/procedures. Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum.
The warranty period is 5 years from the date of manufacture.

Application Areas

It is used for lubricating engines with spark ignition and compression ignition, according to the indications in the technical manual of the engines.

Technical details

No. Characteristics Admissibility conditions Testing method
1 Density at 20°C, g/cm3 max. 0,900 SR EN ISO 12185 ASTM D 4052
2 Kinematic viscosity at 100°C, mm2/s 12,5 - 16,3 SR EN ISO 3104 ASTM D 445
3 Viscosity index min. 125 STAS 55 ASTM D 2270
4 * Dynamic viscosity (CCS) la -20°C, mPa.s, max. 7 000 STAS 12071 ASTM D 5293
5 Dynamic viscosity (MRV) at the pumpability temperature of -25° C, mPa.s, max. 60 000 ASTM D 4684
6 Flash point COC, °C min. 210 SR EN ISO 2592 ASTM D 92
7 Pour point, °C, max. -30 STAS 6170 ASTM D 97
8 Sulfated ash, % max. 1,0 SR ISO 3987 ASTM D 874
9 Total basicity number (TBN), mg KOH /g min. 4,5 SR ISO 3771 ASTM D 2896
10 * Calcium, % m/m Reported STAS 8428 ASTM D 4628
11 * Zinc, % m/m Reported STAS 7717 ASTM D 4927
12 * Phosphorus, % m/m max. 0,11 STAS 7330 ASTM D 4927
13 * Noack volatility, % max. 15 STAS 8465 ASTM D 5800
14

Foaming properties (tendency - stability), ml, max.

  • at 24°C
  • at 93,5°C
  • at 24°C, after determining at 93,5°C
10 - 0 50 - 0 10 - 0 SR ISO 6247+C1 ASTM D 892
15 Copper strip corrosion (3 h at 100°C) max. 1b SR EN ISO 2160 ASTM D 130