Wire Rope Slings
Endless wire rope slings
Product details
Circular lifting cables made of steel wire rope are manufactured according to SR EN 13414-1, EN 13414-3; the steel wire ropes used are according to EN 12385-4, with vegetal or steel core. The circular looms are obtained by mounting two aluminum sleeves (duralumin) or by braiding the ends of a piece of cable mounted in the loop (splicing).
The orders must include the following details: the wire rope diameter, the nominal length of the curb circumference in mm or m, the type of matte / galvanized wire rope and the type of sling: pressed or spliced; If these details are not mentioned, it will be considered implicitly that it is a pressed circular cable, made of galvanized wire rope.
The table below shows the characteristics of the slings made by pressing(sleeve) from 6×19 or 6×36 steel wire ropes with vegetal core; for spliced slings the coefficient is reduced with a wiring loss coefficient of 0.9
Technical details
Rope diameter [mm] | Working load [kgf] | |
direct | în formă de inel | |
8 | 1530 | 1220 |
10 | 2380 | 1910 |
12 | 3430 | 2740 |
14 | 4650 | 3720 |
16 | 6120 | 4890 |
18 | 7710 | 6170 |
20 | 9540 | 7640 |
22 | 11540 | 9230 |
24 | 13700 | 10960 |
26 | 16110 | 12890 |
28 | 18680 | 14940 |
32 | 24390 | 19510 |
36 | 30880 | 24700 |
40 | 38140 | 30510 |
coeficient de calcul | 2 | 1,6 |