Oils and greases
Baroil® transmission oil T75
Product details
T 75 EP 1 oil is obtained from refined mineral base oils, with the addition of extreme pressure additives, anti-corrosive, antioxidant, anti-rust, anti-wear, antifoaming, and pour point depressant additives (API: GL-1, according to SR 13464:2001). The quality conditions for T 75 EP 1 oil are as follows:
Observations
Packaging, marking, storage, transport, and handling are done according to STAS 4225 and internal instructions/procedures.
Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum,
The warranty period is 5 years from the date of manufacture.
Application Areas
The oil is used for lubricating tractor gear transmissions and as hydraulic fluid, according to the provisions in the technical manual or operating instructions of the tractors.
Technical details
| No. | Characteristics | Admissibility conditions | Test method |
| 1 | Density at 20°C, g/cm3 | max. 0,910 | SR EN ISO 12185 ASTM D 4052 |
| 2 |
Kinematic viscosity, mm²/s (cSt)
|
min. 7,0 42 ... 50 | SR EN ISO 3104 ASTM D 445 |
| 3 | Viscosity index | min. 85 | STAS 55 ASTM D 2270 |
| 4 | Pour point, °C | max. -25 | STAS 6170 ASTM D 97 |
| 5 | Flash point, COC, °C | min. 210 | SR EN ISO 2592 ASTM D 92 |
| 6 | Substances insoluble in organic solvents, % | max. 0,01 | STAS 33 |
| 7 | Water content, % | Missing | SR 13484; STAS 24/2 ASTM D 95 |
| 8 |
Foaming properties (tendency - stability), ml, max.
|
30 - 0 20 - 0 30 - 0 |
SR ISO 6247+C1 ASTM D 892 |
| 9 | Corrosion on copper strip (3 h at 100°C) | max. 1b | SR EN ISO 2160 ASTM D130 |
| 10 | Corrosion on steel in the presence of water | No traces of rust | SR ISO 7120 ASTM D 665 |
| 11 | Sulfated ash, % | max. 0,25 | SR ISO 3987 ASTM D 874 |
| 12 | Phosphorus content, % wt | Reported | STAS 7330 ASTM D4927 |
| 13 | Sulfur content, % gr. | min. 0,5 | ASTM D 2622 |
| 14 |
High-pressure resistance on the four-ball machine:
|
min. 2100 max. 2 |
STAS 8618 ASTM D 2783 |
