Oils and greases

Engine oil Baroil® 20W40

Product details

The oil is obtained from refined mineral oils, with added additives that give it antioxidant, anti-corrosive, anti-wear, detergent-dispersant properties, and viscosity index improvement (API: SD/CB, according to SR 13464:2001). The quality conditions for M 20W/40 SUPER 1 oil, extracted from ST-6/2007, Ed.1 are as follows:

Technical data sheet
20W40-500x751
20160915_142102
20160915_142056
20160915_141940
20160915_141928

Observations

Packaging, marking, storage, transport, and handling are done according to STAS 4225 and internal instructions/procedures. Packaging method: 1 liter – 3 liters – 5 liters – 10 liters – 20 liters; 200 liter drum.
The warranty period is 5 years from the date of manufacture.

Application Areas

It is used mainly for lubricating engines with spark ignition, in accordance with the operating instructions in the engine’s technical manual.

Technical details

No. Characteristics  Admissibility conditions Testing method
1 Density at 20°C, g/cm3 max. 0,900 SR EN ISO 12185 ASTM D 4052
2 Kinematic viscosity at 100°C, mm2/s 13 - 15 SR EN ISO 3104 ASTM D 445
3 Viscosity index min. 115 STAS 55 ASTM D 2270
4 Pour point, °C max. -25 STAS 6170 ASTM D 97
5 Flash point COC, °C min. 215 SR EN ISO 2592 ASTM D 92
6 Sulfated ash, % max. 1,0 SR ISO 3987 ASTM D 874
7 Water content Missing SR 13484; STAS 24/2 ASTM D 95
8 Substances insoluble in organic solvents, % Missing STAS 33, Method 1
9 Total basicity number (TBN), mg KOH /g min. 2,5 SR ISO 3771 ASTM D 2896
10

Foaming properties (tendency - stability), ml, max.

  • at 24°C
  • at 93,5°C
  • at 24°C, after determining at 93,5°C
 10 - 0 50 - 0 10 - 0 SR ISO 6247+C1 ASTM D 892
11 Copper strip corrosion (3 h at 100°C) max. 1b SR EN ISO 2160 ASTM D 130

Customers were also interested in