Welding
PATON – MONORUTHIL welding electrodes
Product details
PATON Monoruthil electrodes are used for manual arc welding with alternating or direct current in metal profiles for general construction or high-stress applications, made from carbon steel or medium-alloy steel. Electrodes with a diameter of 2.5 to 4 mm can be used for welding in any position except vertical down, while 5 mm diameter electrodes can weld in horizontal, horizontal down, transverse, and vertical up positions.
Coating type: rutile
Standardization: AWS A 5.1:E 6013
Coding: Е43 2 RС11 according to ISO 2560-A
Chemical composition of the welded metal (%):
| Mn | C | Si | P | S |
| 0,40-0,65 | Max. 0,11 | 0,15-0,45 | Max.0,035 | Max.0,030 |
Mechanical properties of the welded metal:
| Tensile strength N/mm² | Elongation at break % | Impact strength J/cm² |
| min.450 | ≥22,0 | ≥78 |
Specific characteristics:
This type of electrodes can weld in conditions with difficult access. Thus, the gas bubbles that form around the electric arc remove water and provide favorable conditions for welding, making them suitable for welding, for example, eroded sections of water pipes at pressures up to 1 Atm.
MONORUTHIL electrodes ensure easy ignition, providing a stable and uniform arc, with few spatters, easy slag removal, and the formation of a uniform weld. They are specially designed for welding steel and metal structures subjected to static and dynamic loads, for welding containers and pipes where high mechanical properties are required for the welded sections.
Wet electrodes can be reconditioned by drying for one hour at a temperature of 300-350°C, but no more than 3 times.
Welding conditions:
| Electric current amperage (A), depending on the diameter of the electrodes (mm) | |||
| 2,5 | 3 | 4 | 5 |
| 50-100 | 80-110 | 130-140 | 170-230 |
Packaging method:
Boxes of 2.5 / 5 kg, and 1 kg for diameters of 2.5 – 3 mm
Manufacturer's certificate:
| Producer | Origin | Certified product | Certificate № |
| LLC “Pilot Plant E.O.Paton” | Ucraina | Consumabile pentru sudură: standard general pentru metale de umplere și flux metalic pentru sudarea materialelor: electrozi acoperiți pentru sudarea manuală cu arc electric conform EN ISO 2560 și EN ISO 3581, certificare CE conform EN 13479 | 1922-CPR-0998 |
Bibliography:
SR EN ISO 2560:2010: Welding materials. Covered electrodes for manual arc welding of non-alloy and fine-grained steels. Classification. SR EN ISO 14341:2011: Welding consumables. Wire electrodes and deposits for gas-shielded metal arc welding of non-alloy and fine-grained steels. Classification.
